A Bethlehem Steel Bureau


Im sort of fascinated by the wood and steel elements of our newish Bethlehem Steel line. We have been working on it for about a year now and this is the first case piece ... There just seem to be endless possibilities here ... This one started with the drawing above, but as we were building it, even though all the other tables in this style so far have had the legs pointing down, this piece definitely seemed to want its legs inverted, pointing up. OK, well listen. We turned them over and the results are below. More anchored to the ground, but yet lighter feeling at the same time .... Sometimes you can figure things out in the drawings, but sometimes you have to let your instincts take over .... The piece, to us at least, seems to be stronger and more solid in this configuration ... Click the photos to enlarge them ...
The case with side shims and full extension undermount runners ... Its the first time we tried the Grass runners ... So far so good ... They seem to wobble a bit less when you open and close them , and close a little faster than the Blums ... Cheaper too from our supplier ... The high dolly was a brainstorm too ... Hate, hate, hate crawling around on the floor ...
Mocking up the bolts with masking tape .. three holes or four ?? Three it is ...
More bolts in the front center leg ... This is some of Irions finest figured cherry .. Ive had this log for several years waiting for the right project ... We had Just enough to make it ...
Share:

Tidak ada komentar:

Posting Komentar

人気の投稿

Blog Archive

Diberdayakan oleh Blogger.

ブログ アーカイブ